by Ruger issued a safety bulletin on their SR22 .22LR pistol. An assembly issue may render internal safety mechanisms inoperative in a small number of the pistols.
More from Ruger:
 |
| Ruger has discovered that a small number of SR22® pistols may have right and left frame inserts that are not properly secured together. In rare circumstances, this condition may render certain internal safety mechanisms ineffective and the pistol has the potential to discharge upon decocking. Pistols that may be exhibiting this condition will intermittently exhibit a “slack” single-action trigger. NOTE: A “slack” single-action trigger occurs if, while operating the pistol in single-action mode with a magazine inserted, the slide forward, and the manual safety disengaged, a trigger pull does not encounter resistance and the hammer does not fall. Although only a very small number of pistols appear to be affected, Ruger is committed to safety and would like to examine all SR22 pistols that have ever exhibited a slack single-action trigger or discharged upon decocking. Potentially affected pistols include any SR22 pistol with a serial number of 369-40078 or lower (including all SR22 pistols with a “SS” prefix). If your SR22 pistol has ever exhibited one of the conditions described above, you should immediately stop using your pistol and sign up for the Safety Retrofit as outlined in the Safety Bulletin. If you have never experienced either condition, your pistol is not affected by this Safety Bulletin. Details about what to look for and how to sign up for the retrofit also appear on our website at Ruger.com/SR22Retrofit. The website also contains answers to Frequently Asked Questions, a video demonstrating the inspection process, and other information that you may find helpful. |
Thanks! I’ll cross post to the GBBL blog.